Available 10, 25, 50 & 100 Sheet packs
Instructions
Print: Mirror Image
Temp: 350F
Time: 20 Seconds
Pressure: Heavy
Peel: Warm
Wash: Temp 105F
Works on Light Colored Fabrics
- 100% Cotton
- 100% Polyester*
- 50/50 cotton/poly
*Some polyester garments may experience dye migration, prior testing should be conducted
Accessories Required
Computer, Inkjet Printer, Heat Press.
Printable side
The printable side (white matte coated side) where film peels off.
Trimming Your Image
The paper has a transparent polymer background. However it is recommended you trim close to your image to reduce the polymer background even more. The trim does not need to be accurate. It is recommended to trim roughly 0.5 - 1.0 inches around your image.
Pressure Settings
To ensure that the coating has properly fused with the fabric, we recommend to use maximum pressure. If this paper is applied with inadequate pressure, the transfer will not wash well.
Peeling
This paper is to be peeled hot to warm. Peeling should occur no less than 5 seconds after pressing. Also if you have difficulties peeling the backing off the shirt, while the fabric is hot, gently tug on the sides of the shirt, the backing will “pop” right out. If you would like a glossy finish, peel cool or cold.
Wash Instructions
Wait 24 hours before washing. Machine wash using mild detergent. Do not use bleach or other aggressive cleaning agents. Cannot be dry cleaned. Wash Temperature cannot exceed 105F. To increase color vibrancy, it is recommended to iron the image after each launder.
Storage
Inkjet Light has an indefinite shelf life when stored at room temperature. Keep away from direct heat, sunlight and humidity.
