ECONORED 3 30" X 8.75' DRYER

EconoRed III-30, with 30 in. wide belt and three 24 in. wide heaters (total 10,800 watts) cures up to 475 plastisol-printed garments/hr, or 100 garments/hr screen-printed with water-based ink or discharge. 

A top-mounted ventilation system filters exhaust air, cools the enclosure's outer skin, and evacuates moisture and fumes from the heating chamber. It also makes ER-II dryers over 20 percent quieter and 5 in. (13 cm) narrower, and allows the control box to be positioned the right side (standard) or left side of the enclosure to suit shop layouts.

All heaters feature closely spaced coils that provide high-density, medium-wavelength infrared heat for maximum cure speed without cold spots or under-curing, and come with a 15-year warranty.

• 30" wide belt by 8.75' length
• 475 Plastisol or 150 Waterbased or Discharge per hour
• 240V Single Phase - $1.08 hour to operate
• Digital Temp Control
• Digital Belt Speed Control
• Cures Plastisol, Waterbased & Discharge Inks
• Adjustable Heater Height
• 15 Year Heater Warranty
• Upgradeable, Add on additional Belt extension and heat chamber and cure up to 1,000 shirts per hour.

ADVANCED
Top-mounted, Focused Exhaust Air System evacuates fumes and moisture quickly

QUIET
20% quieter than earlier models

HEAVY DUTY
"X-Series" Conveyor Belt Tracking System

PRECISE
Infrared Focusing System allows 2 - 7 in. (5 - 17.7 cm) belt-to-heater height adjustment to accommodate bulky garments or hats, and can be customized to provide additional heater clearance

BELT WIDTH
(Maximum garment width)
30" (76 cm) or 54" (137 cm)

HEATER WIDTH
24" (61 cm) or 48" (122 cm)

MAXIMUM IMAGE WIDTH
18 in. (46 cm) or 42 in. (107 cm)
(Heater width minus 6 in. [15 cm])

ACCURATE
Temperature controller accurate to +/-1°F (+/-0.5°C)
Digital PID with fuzzy logic — industry's most advanced

CONSISTENT
Heavy duty DC belt speed motor with digital voltage display

INNOVATIVE
Shorter, slimmer and quieter with high heat and production

EXPANDABLE
Add heat chambers at 36 in. (91 cm) long each, and 18 in. (46 cm) belt extensions, front or rear

Exhaust hood - reduces fumes at end of dryer

Additional Chambers to be added

Conveyor extensions

Heavy duty belt motor

(recommended for longer conveyor belts)

3 phase power

Locking casters for easy mobility