ADV Liquid Metallic Colors Plastisol Ink

Advantage Liquid Metallic fine ground colors are non-corroding and have excellent rub and wash resistance. 

Print Flash Print or Under basing may be required depending on artwork and desired look.

Opacity: Varies
Viscosity : Medium
Bleed Resistance : None
Build Up : Moderate
Definition: Bold to Moderate

Recommended Substrates
Cotton, cotton blends, polyesters, and some nylon (generally open weave or mesh types) as well as other synthetics.

Curing: Gel or flash-cure: Approximately 230 Degrees F/110 Degrees C.

Full cure: 320 Degrees F/160 Degrees C. 

Transfer Temperature: 350 Degrees F/177 Degrees C.

Fusion tests should be made prior to any production run. Failure to cure properly causes poor wash fastness, inferior adhesion and increased dye migration.

Opacity : Medium

Squeegee: Use medium 70 durometer

Wash-Up: ECO27705 Textile Ink degrader or SCP17 Press Wipe.

Mesh: Use 60-86 mesh count for brightest effect
Use 110 to 155 mesh count for more detailed prints.

Stencil: CBX7700 or CBX7500 recommended but will work with Any Conventional direct emulsion or capillary films.