23" x 31" Aluminum Frame with Hi-Dro S Mesh
Thinner thread equals wider mesh opening
Details
- Less Squeegee Pressure
- More opaque prints
- Easily holds the same details
- Use with Waterbase or Plastisol
- Inside Diameter 17" x 21"
Mix & Match Different Frame Sizes and Mesh Counts
to Get Quantity Discounts
Mix & Match 6 Frames Sizes & Mesh Counts to Get the 6 Frame Price - At Checkout use Discount Code: Mix6
Mix & Match 12 Frames Sizes & Mesh Counts to Get the 12 Frame Price - At Checkout use Discount Code: Mix12
Mix & Match 50 Frames Sizes & Mesh Counts to Get the 50 Frame Price - At Checkout use Discount Code: Mix50
Mix & Match 100 Frames Sizes & Mesh Counts to Get the 100 Frame Price - At Checkout use Discount Code: Mix100
High-quality 6063T5 aluminum pre-stretched with Saati Hi-Dro S Mesh in various mesh counts. All aluminum frames are extruded from the highest-grade aluminum and hand welded right here in the USA, ensuring a strong structure, flat, watertight finish.
Saati HI-DRO mesh allows for superior ink transfer compared to conventional mesh due to the wider mesh opening. The thinner thread also releases from the ink much more readily. As a result, you need lower squeegee pressure to get the ink to clear the screen. Lower squeegee pressure also means less ink is driven into the shirt and instead stays on top of the fabric. This directly impacts the opacity of your print. Resulting in a brighter and softer ink deposit.
Saati HI-DRO is a high modulus, low elongation mono-filament polyester screen printing fabric with a proprietary surface treatment. Developed to meet the requirements of garment printing applications.
Specially designed to optimize the deposit when printing with water-based inks or plastisol, this new range was constructed to maintain the same mesh count and use thinner thread diameters.
Each order of Saati HI-DRO mesh comes carefully boxed with cardboard slip sheets placed in between each frame to ensure the best shipping conditions possible so your new screens arrive in optimal condition.
*Caution- Thin thread mesh is fragile in comparison to regular thread. While ink will print much easier the mesh must be handle with care or it can rip.
Technical Specs for Hi-Dro S Mesh
122 White
Thread Diameter: 55 micron
Mesh Opening : 153 micron
Percentage of open area: 55%
Theoretical ink deposit: 53 cm3
157 White
Thread Diameter: 48 micron
Mesh Opening : 109 micron
Percentage of open area: 46%
Theoretical ink deposit: 35 cm3
198 White
Thread Diameter: 40 micron
Mesh Opening : 85 micron
Percentage of open area: 44%
Theoretical ink deposit: 29 cm3
230 Yellow
Thread Diameter: 40 micron
Mesh Opening : 68 micron
Percentage of open area: 38%
Theoretical ink deposit: 24 cm3
