Home » 20" x 24" HI-DRO S Mesh Aluminum Frame

20" x 24" Aluminum Frame with Hi-Dro S Mesh

Thinner thread equals wider mesh opening

Details

  • Less Squeegee Pressure
  • More opaque prints
  • Easily holds the same details
  • Use with Waterbase or Plastisol
  • Inside Diameter 17" x 21"

High-quality 6063T5 aluminum pre-stretched with Saati Hi-Dro S Mesh in various mesh counts. All aluminum frames are extruded from the highest-grade aluminum and hand welded right here in the USA, ensuring a strong structure, flat, watertight finish.

Saati HI-DRO mesh allows for superior ink transfer compared to conventional mesh due to the wider mesh opening. The thinner thread also releases from the ink much more readily. As a result, you need lower squeegee pressure to get the ink to clear the screen. Lower squeegee pressure also means less ink is driven into the shirt and instead stays on top of the fabric. This directly impacts the opacity of your print. Resulting in a brighter and softer ink deposit.

Saati HI-DRO is a high modulus, low elongation mono-filament polyester screen printing fabric with a proprietary surface treatment. Developed to meet the requirements of garment printing applications.

Specially designed to optimize the deposit when printing with water-based inks or plastisol, this new range was constructed to maintain the same mesh count and use thinner thread diameters.

Each order of Saati HI-DRO mesh comes carefully boxed with cardboard slip sheets placed in between each frame to ensure the best shipping conditions possible so your new screens arrive in optimal condition.

*Caution- Thin thread mesh is fragile in comparison to regular thread. While ink will print much easier the mesh must be handle with care or it can rip.

122 White
Thread Diameter: 55 micron
Mesh Opening : 153 micron
Percentage of open area: 55%
Theoretical ink deposit: 53 cm3

157 White
Thread Diameter: 48 micron
Mesh Opening : 109 micron
Percentage of open area: 46%
Theoretical ink deposit: 35 cm3

198 White
Thread Diameter: 40 micron
Mesh Opening : 85 micron
Percentage of open area: 44%
Theoretical ink deposit: 29 cm3

230 Yellow
Thread Diameter: 40 micron
Mesh Opening : 68 micron
Percentage of open area: 38%
Theoretical ink deposit: 24 cm3

Different Frame Sizes and Mesh Counts 
to Get Quantity Discounts

Mix & Match 6 Frames Sizes & Mesh Counts - use Discount Code: Mix6

Mix & Match 12 Frames Sizes & Mesh Counts - use Discount Code: Mix12

Mix & Match 50 Frames Sizes & Mesh Counts - use Discount Code: Mix50

Mix & Match 100 Frames Sizes & Mesh Counts - use Discount Code: Mix100

Nortech Graphics

20" x 24" HI-DRO S Mesh Aluminum Frame

In stock
SKU: HD2024-122
Mesh Count
Permanent Blockout Border
$38.62
Select Your Customised Options:
Is this item to be supplied to an address in Queensland Australia? *
18+ Photo Identification
18+ Proof of Age photo identification is a requirement for blade sales that are to be sent to a Queensland postal address. We are unable to post any knives to Queensland without proof of age that matches name and address. To speed up your order please upload proof of age below.
No file chosen...
Choose File
 
More payment options

Info

Saati HI-Dro S Thread Mesh Aluminum Frames

20" x 24" Professional Grade Aluminum stretched with HI-DRO S Mesh

  • Thin Thread = larger mesh opening
  • Less Squeegee Pressure
  • Ink more easily cleans the screen
  • Better opacity without sacrificing image quality
  • Made in the USA

*Caution- Thin thread mesh is fragile in comparison to regular thread. While ink will print much easier the mesh must be handle with care or it can rip. 

Download Hi-Dro mesh specs