Tiger White HIGH OPAQUE / LOW BLEED Fast Flash Plastisol 

Non Phthalate- Screenprint Ink

QUALITY Ink SAVES You MONEY, in Easier Printing, Faster Production and Brilliant Colors!

Check out the Pictures of White Tiger T-shirts printed our Ultra Premium Tiger White Plastisol

$ FAST Flash increases production-  5 to 15 seconds at 150 F

$ Ultra Premium High Opaque & Low Bleed Plastisol Ink

$ Creamy & Easy to Print

$ Lower Cure Temp - 320F

$ Non-Phthalate Formula

$ Optical Brighteners for more Vibrant Color

$ Satin Finish

$ Soft Hand Print

$ Shelf Life 24 + months

$ 100% Quality Money Back Guarantee

$ Made in the USA

$ You can always find Cheaper but You won't find a Better VALUE!

DETAILED DESCRIPTION

Advantage Brite Tiger White High Opaque / Low Bleed plastisol ink, is a High Performance, optically Bright White ink formulated with a short body and low hot tack to give Excellent Printability across a wide range of screen printing mesh counts. Advantage Tiger White is a Quick Flashing white with Excellent Opacity, Fiber mat down and Satin Finish. Use as an underbase, stand alone or pop white thru finer mesh counts without the need for viscosity modifiers.

Flash: Fast 150F Gel
Opacity: Excellent
Viscosity : Medium High
Bleed Resistance : High
Build Up : Low
Finish: Satin
Definition: High

PRINTER'S PARAMETERS 

Substrates
100% cotton, 50/50. cotton/ poly blends, some synthetics and some 100% Polyesters.
We recommend our ADV150 PolyWhite for Optimal Bleed Resistance on 100% Poly's, 

Bleed resistance: Very Good 

Mesh
Range: 86 to 230

Tension: 18-35 recommended 

Squeegee type: 70, 60/90/60 or 70/90/70 durometer

Squeegee blade: Square Sharp

Squeegee angle: 10 to 15 degrees

Squeegee Pressure: Avoid excess pressure 

Squeegee speed: Two stroke Medium speed 

Gel temp 140-150 F 

Cure temp:320 F at 60 seconds

Wash-Up: ECO2770 Textile Ink degrader or SCP17 Press Wipe.

Stencil: CBX7700 or CBX7500 is recommended but will work with Any Conventional direct emulsion or capillary films.
Emulsion Over Mesh: 15-20%
Off Contact: 1/16"

Storage
65-95F
Avoid Direct Sunlight
Keep container well sealed

Printing Tips

Best practice to "pre-shear" ink before introduction to the screen. Do this slicing and folding the with an ink spatula. Do NOT mix with a power drill, friction from mechanical mixers other than a "turn about" style mixer will thicken up the ink body.

Poorly dyed polyesters or too much heat in the curing process can compromise ANY low bleed inks ability to block dye migration.

For printing onto tye dye fabrics, 2 strokes / flash/ 2 strokes for optimal performance

Ink has optical brighteners which may appear at the top of the ink as a blue gel. Simply mix it back into the ink before production.

If ink climbs the squeegee, the ink has not been mechanically sheered enough. Carefully transfer ink into a container and shear with a paint knife, cutting and folding over on itself as you stir the ink.

There may be a potential to ghost on some fabrics due to the dyes used. Thoroughly test on stone washed or light colors.

Phthalate CompliantInks manufactured for Kolormatrix are certified by one of the largest plastisol ink manufacturers in the world to be Phthalate Compliant and does not knowingly add plasticizers containing the phthalates listed and outlined in California Bill 1108, CPSIA HR-4040 and Oeko-tex Standard 100. The plasticizers identified may include di-(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), benzyl butyl phthalate (BBP), diisononyl phthalate (DINP), diisodecyl phthalate (DIDP), di-n-octyl phthalate (DnOP), (DIBP) Di-iso-butyl, and (DMP) Dimethylphthalate, including esters of ortho-phthalic acid and are not direct ingredients in the manufacture of Claira High Opacity Non-Phthalate Inks.