* Production dryer with 18" wide conveyor belt.
* Adjustable Heater height / angle
* Digital Temperature control
* Digital Belt speed
* Tilting heater design which works great for curing hats or mugs.
The all-new multi-purpose LittleRed X1-D infrared dryer cures direct-to-garment (DTG) printed textiles as well as plastisol, water-based and discharge-printed garments at higher rates than possible with conventional dryer designs. It features a high-powered pre-heating zone that rockets ink temperatures past 300°F (149ºC) within the first several inches of conveyor travel, maximizing the distance and dwell time for optimum curing of any ink, allowing increased conveyor belt speeds and dryer output. With overall conveyor belt length of 48 in. long and 27 in. long heating chamber, the X1-D features a powerful 380 cfm targeted exhaust system as standard to rapidly remove moisture and air contaminates from the heating chamber, as well as cool the skin and controls.
# # Production speeds are estimated by the manufacturer and will vary depending on printing parameters, deposit and type of ink, humidity, weight of garment, etc.
HIGH PRODUCTION
162 plastisol shirts
81 waterbased / discharge shirts
34 DTG White ink shirts per hour
LOW COST OPERATION
X1D 18" $0.23 per hour power
ELECTRIC
X1D 18" 2,280 Watts heaters - 240V, single phase, 12.5 amps, 3 wire connector
SMART
18" wide Teflon-coated fiberglass belt with a tracking system
ADJUSTABLE
Speed, temperature, heater height and tilt
PRECISE
Powerful infrared heater with tight coil pattern and heat shields
VALUABLE
15 Year Heater warranty, high quality, exceptional service
COMPACT
X1D 18" - 30" width x 4' length
EXPANDABLE
Dryer grows with Your Business, simply Add additional Belt length and heat chamber in the future, dryer becomes X3D
Options
Additional Belt length 18" or 36" length
Drop Down Wheels
This equipment ships LTL, some assembly required
