UltraMix® 7500 Series Pantone® Color System consists of 19 non-phthalate, high performance colors, formulated for ultra high speed wet-on-wet automatic printing. Create special or standard colors by using International Coatings’ UltraMix®, Pantone® color matching software, either online or on the desktop version. 7500 Series Colors are FlexCure™ and can cure as low as 275ºF (135ºC). Well suited for fine detail and halftone printing using finer mesh counts.

Kit Includes:

Software for the 7500 series mixing system. Click Here. Please remember to select the 7500 Series - Coated or 7500 Series - Uncoated when selecting your formula. This system is a ready to print system and not the concentrated system.

Recommended Fabrics:
100% cotton or cotton/polyester blends. Use an underbase for dark fabrics.

Ink Application:
Colors should be printed without any modifications. If thinning is required, use 1099 LB Lo-Bleed Reducer (1% to 5% by weight).

Screen Mesh:
110 to 305 Monofilament.

Emulsion:
Any direct or indirect plastisol emulsion. Use 35 to 70 micron capillary film for best results.

Squeegee:
60-70 Durometer: Sharp Edge. 60/90/60 or 70/90/70 Triple Durometer: Sharp Edge

Drying Temperatures:

275ºF - 325°F entire ink film*

*It is always recommended to test dryer temperatures and wash test the printed product before and during a production run.

Clean Up:

Any Environmentally friendly plastisol screen wash.

Storage of Ink Containers:
Keep indoors and store in a cool area. Recommended storage at 65º F to 90º F (18º C to 32º C). Avoid storage in direct sunlight or in extreme temperature conditions.