Description
The all-new multi-purpose LittleRed X1-D infrared dryer cures direct-to-garment (DTG) printed textiles as well as plastisol, water-based and discharge-printed garments at higher rates than possible with conventional dryer designs. It features a high-powered pre-heating zone that rockets ink temperatures past 300°F (149ºC) within the first several inches of conveyor travel, maximizing the distance and dwell time for optimum curing of any ink, allowing increased conveyor belt speeds and dryer output. With overall conveyor belt length of 48 in. long and 27 in. long heating chamber, the X1-D features a powerful 380 cfm targeted exhaust system as standard to rapidly remove moisture and air contaminates from the heating chamber, as well as cool the skin and controls.

Description

Vastex Little Red X1D 54" x 4' Conveyor Dryer

NEW Technology - Speeds curing of Plastisol, Waterbased, Discharge & DTG Digital WHITE Inks 15 Year Heater Warranty!

* Digital Controls & Expandable - Add on additional heat chamber and it Upgrades to become Little Red X2 or X3.
* Powered Exhaust to evacuate fumes and moisture from dryer
* Production dryer with 54" wide conveyor belt. * Adjustable Heater height / angle * Digital Temperature control
* Digital Belt speed * Tilting heater design which works great for curing hats or mugs.

The all-new multi-purpose LittleRed X1-D infrared dryer cures direct-to-garment (DTG) printed textiles as well as plastisol, water-based and discharge-printed garments at higher rates than possible with conventional dryer designs. It features a high-powered pre-heating zone that rockets ink temperatures past 300°F (149ºC) within the first several inches of conveyor travel, maximizing the distance and dwell time for optimum curing of any ink, allowing increased conveyor belt speeds and dryer output. With overall conveyor belt length of 48 in. long and 27 in. long heating chamber, the X1-D features a powerful 380 cfm targeted exhaust system as standard to rapidly remove moisture and air contaminates from the heating chamber, as well as cool the skin and controls.

# # Production speeds are estimated by manufacturer and will vary depending on printing parameters, deposit and type of ink, humidity, weight of garment, etc. HIGH PRODUCTION X1D 54" 324 plastisol shirts, 162 waterbased / discharge shirts, 68 DTG White ink shirts per hour
LOW COST OPERATION X1D 54" $0.81 per hour power
ELECTRIC
X1D 54" 8,100 Watts heaters - 240V, single phase, 32 amps, 3 wire connector
SMART
30" wide Teflon coated fiberglass belt with tracking system

ADJUSTABLE
Speed, temperature, heater height and tilt

PRECISE
Powerful infrared heater with tight coil pattern and heat shields

VALUABLE
15 Year Heater warranty, high quality, exceptional service

COMPACT
X1D 54" - 65" width x 4' length

EXPANDABLE

Dryer grows with Your Business, simply Add additional Belt length and heat chamber in the future, dryer becomes X3D

Options

Additional Belt length 18" or 36" length

Power Exhaust

Rolling Caster

Heavy Duty Belt motor - recommended with extended belt length

If you want to add any of these Options, please message with your purchase and we will adjust invoice.

This equipment ships LTL, some assembly required

Vastex