Premium 1:55 Emulsion Remover, works with All Emulsions & Capillary Films

Product Description

Concentrated formula may be diluted with water, 1 part chemical and 54 parts water for Regular Strength and for use in Dip tanks. For Super Strength product mix 1 part chemical with 30 parts water.

Fast acting Emulsion Remover and De-greaser, that effectively and safely removes all types of emulsions and capillary films.
It is environmentally safe and ready to use right out of the bottle.

• Bio-degradable
• NO VOC's
• Non Hazardous and Drain Safe.
• NO Odor
• Non Flammable
• Works with all types of emulsions and capillary films.
• Built In de-greasers to leave you with a squeaky clean screen.
• Extra Strength may diluted with water, up to 1:55

Recommended Emulsions

All Types and Brands of Emulsions and Capillary Films

Application

Step 1: Remove All Ink from the screen surface using ECO2770 Ink Degrader or ECO4400 On Press wipe.

Step 2: Spray or brush SCP 625 or "Diluted" SCP650 or SCP675 Emulsion Remover onto BOTH sides of the screen, allow to set for 30 seconds to maximum of 3 minutes for chemical to fully penetrate the emulsion surface.

Step 3: Using High-Pressure Water, rinse away the emulsion stencil.

Step 4: Repeat, if needed to remove extra thick or post-hardened areas of emulsion.

Step 5: Rinse Thoroughly

Insert Optional Step to avoid using Haze Remover: Spray ECO3000 Ink & Stain Remover onto both sides of the screen and scrub in, let set 30 to 60 seconds and pressure wash off

Step 6: Spray Diluted SCP623 Screen Degreaser and brush into both sides of screen and Rinse thoroughly

Step 7: If needed apply SCP708 Haze Remover. (if you use optional ECO3000 you will seldom need to use Step 7 Haze remover.)

PRODUCT PROPERTIES 

Appearance: Clear, colorless liquid
Odor: None
pH: 3.5
Flash Point: None
Specific Gravity: 1.07
Weight, per gallon: 8.9 lbs
Stability: Stable
DOT Shipping: Non-hazardous