Prestige R2 13" Shaker Dryer Bundles

Drop Ship
Bundle Package
S & H Surcharge
Regular price $8,623.99

Bundle the Prestige R2 DTF Printer with a DTF Powder Shaker & Dryer, with DTF supplies, and save over $900! Get everything you need for a powerhouse DTF printing workflow in one purchase.

INTERMEDIATE Bundle contains:
Prestige R2 DTF Printer
DigiRIP RIP Software
Miro 13 DTF Powder Shaker and Dryer
DTF Film Roll - A3+ (13") x 109yd (x1) (Choose from Universal or Quick Glide)
Color Max Ink (CMYK+W) 1kg
Color Max DTF Cleaning Solution 1kg
Color Prime Hot Melt Powder 1kg
Isopropyl Alcohol 16oz
Lintless Wipe 4 x 4 30 Each
DTF Station 7" Cleaning Swabs - 50 Each

PREMIUM Bundle contains:
Prestige R2 DTF Printer
DigiRIP RIP Software
Seismo M16 DTF Powder Applicator and Dryer
Purifier L2 Portable Air Filter
DTF Film Roll - A3+ (13") x 109yd (x1) (Choose from Universal or Quick Glide)
Color Max Ink (CMYK+W) 1kg
Color Max DTF Cleaning Solution 1kg
Color Prime Hot Melt Powder 1kg
Isopropyl Alcohol 16oz
Lintless Wipe 4 x 4 30 Each
DTF Station 7" Cleaning Swabs - 50 Each

Training:

  • Training is required for all Prestige R2 purchases. Choose from the following options:
    • Virtual Training: Included with purchase price 
    • Optional On-Site Training: Additional $2750

 

Prestige R2 DTF Printer

Print with precision and flair with the Prestige R2 DTF Printer! With its chic, integrated design, this printer combines elegant desktop convenience with powerful performance for all those looking to get started with DTF. 

Features:

  • Speed: 27 sq. ft. / hour, 6pass
  • White Ink Management System (WIMS): timed white ink stirring system to circulate and maintain white ink inside printer
  • Passive Auto-Cleaning: when printer is left on, it will automatically maintain and clean printhead every 4 hours
  • Active Auto-Cleaning: during set intervals (even during printing), printer can stop to clean printhead
  • Head Strike Sensor: helps prevent damage to printhead
  • 1 Liter bulk ink cartridges: more ink for all your printing needs
  • Auto Ink Alert System: informs user when ink is running low
  • Automatic Film Sensor: if film runs out/is not detected, stops printing

Benefits:

  • Size: Desktop sized
  • Great for beginners: perfect balance of power and affordability
  • Easy access/repair: intuitive, labeled board design and connections for easy access and repair

What's Included:

  • Limited Warranty Policy
  • Power Cord
  • Tools
  • Ink Dampers
  • Ink Filters
  • Ink Tube
  • Ink Diverter
  • USB Dongle
  • Ribbon Cables
  • Screws
  • Feed roller components

Specifications:

  • Printer head: Dual Epson XP600 print heads
  • Mainboard: Honson
  • Interface: TCP
  • Software: DigiRIP RIP Software
  • Max. Film Width: to 13" (33 cm)
  • Printing Speed: 27 sq ft / hour, 6pass
  • Machine Weight: 88 lbs
  • Packaging Weight: 110 lbs
  • Dimensions
    • Printer: 29" x 14" x 14"
    • Packaging: 32 1/4" x 15 3/4" x 15 3/4"
  • Daily Output (Based on design size as 12" x 14", 8 hrs per day): 160 pcs
  • Suitable: Entry Level

Applicable Industries 

  • Garments
  • Tote Bags
  • Caps
  • And more!

Fabrics: 

  • Cotton
  • Polyester
  • PU
  • And more!

Compatible With

  • DigiRIP RIP Software
  • Phoenix Air 16x20 Curing Oven
  • Phoenix A2 Curing Oven
  • Seismo M16 DTF Powder Applicator and Dryer

--------------------------------------------------

ColorMAX DTF Inks

Please refer to these instructions on how to switch your machines from DTF Station ink to Color Max Ink.

Features:

  • Engineered for DTF printing
  • Even and consistent texture without any loss in color vibrancy
  • High color density and wide color gamut
  • Pairs well with DTF Station DTF Powder and DTF Film

Benefits:

  • Consistent and professional print quality
  • Tailor-made for reliable DTF printing results

Specifications: 

  • Size available - 1kg
  • Colors available - CMYKW
  • Shelf Life (from Manufacture Date)
    • CMYK - 1 Year
    • White - 6 Months
  • Shelf Life (from Opening Date)
    • CMYK - 6 Months
    • White - 3 Months

-----------------------------------------------------

DTF Station Hot Melt Powder for Direct to Film

Formulated for use during DTG Transfer (DTF), DTF Station adhesive powder is a crucial part of any DTF printing pipeline. Cover your DTG Transfer media with this powder to allow for optimal press. Use for 100% cotton, polyester, nylon, and more! 

Features:

  • After baking the powder, solid white for more vibrant colors
  • Even and regular particles for quality graphics and good adherence
  • Finely coated film means no pinholes!

Sizes:

  • 1 lb
  • 1 kg
  • 20 kg

Instructions (for use with DTF Station Warm Peel film):

  1. Print the image onto the matte side of the film in mirror mode. (CMYK>>White Ink)
  2. Apply hot melt powder evenly and remove the excess powder. Use a Seismo Shaker unit - like the Seismo S20 - to apply powder with ease!
  3. Hover with a heat press to bake the hot melt powder (340°F, 5min). Or use a curing oven (300-315 °F, 1min).
  4. Transfer the image by heat press at 330°F for 15sec with medium pressure.
  5. After the first press,
    Option 1: Wait for 4-6 seconds and remove the film gently
    Option 2: Rub the top surface with a cloth to remove some heat and peel off the film gently
  6. Heat press again at 330°F 5-10sec with medium pressure to enhance softer hand feel.

*This product has no affiliation with Epson and is not endorsed by Epson.

*Settings and directions to print DTF with your F2000/2100 using Garment Creator*

  • The basic concept for DTF is to print CMYK first then WHITE on top of it. ALWAYS MIRROR YOUR IMAGE FIRST!
  • Most of you will be printing onto standard A3 and A4 sheets. Utilize every inch of space as you can to save on time and cost of materials. We call that gang sheeting. One benefit of GC is that it allows multiple images to be uploaded at the same time for printing. Those who order Plastisol Transfers will already know this. The two most common platens I use are 10 x 12 (A2) and 16 x 20 (A3). I place the sheet towards the top middle as a guide and measure how much empty space I have on the sides and bottom because the sheets will be smaller than your platen. I use tape to hold in at least 2 corners to prevent the sheet from shifting while printing.
  • Using GC for DTF is very much the same as with DTG. The only difference is you are reversing the cmyk/white color process and mirroring your image.
  • If your image has black in it then click on Black Garment. That will prevent GC from printing black unnecessarily.
  • For all other colors including white, use (Dark Color).
  • After selecting the proper color choice, you need to tinker with your color and white levels. For me personally I use level 2 for color and level 1 for white. I leave ink density to zero. And make sure you leave enough time in between passes in Pause between Passes (sec). This is very important. I like to choose 30-60 seconds
  • Under White Management it is very important to check “OFF” first before you print your CMYK pass. This will allow your color layer to go down first.
  • After your color pass is done then you go back to white management and click “ON”. Be sure you have enough seconds in your “Pause between passes (sec)” or else your printer will print another CMYK pass right after your white pass. YOU DO NOT WANT THAT! So you MUST manually press cancel on your printer before it does so.

Unfortunately, Garment Creator was not designed for DTF so it is necessary to turn white on and off for every print you do.

 

WARNING

  • Powder should NOT be applied on the printer platen. It needs to be applied AWAY from the printer. Application near the printer increases the risk of printer damage if the printer "breathes" in the adhesive powder into the intake fan by the electronics near the back of the machine. Damage to the printer for inappropriate use may not be covered under warranty.

  • Please wear Personal Protective Equipment (eyeglasses, mask, and gloves) when working with DTF products. The fumes from curing the powder can be hazardous.

Ecofreen Oeko-Tex Certificate

NOTE

  • DTF (Direct To Film) products works with almost all types of fabrics including 100% polyester with good quality results!
  • Ecofreen hot-melt adhesive powder has excellent bonding and flexibility properties with DTF inks.
  • The designed fabrics or printed shirts have a good wash characteristics.
  • The fabric has very slight hand feel touch.
  • The process is much faster than Vinyl printing (Vinyl Printer).

-----------------------------------------------------

Prestige DTF Printer Cleaning Solution

NOTE: Color may vary

Prestige DTF Printer Cleaning Solution is suitable for running maintenance on DTG and DTF printing machines, including the Prestige A3+ Desktop DTF Printer and more! Using this solution regularly will extend the life of your printer.

 -----------------------------------------------------

DTF Station Isopropyl Alcohol 16oz

99% Isopropyl alcohol can clean your water-based digital inks and it can remove unwanted ink splashes without scratches, unlike regular alcohol.

Use this ONLY on Printhead Guards, Encoder Strip, Encoder Wheels, and Platens or areas where unwanted ink splashes on metals/ plastic. Please note this may change/damage certain paints on metal or plastic. Use with care.

*Please contact us if you are not sure whether this product would be a good solution.

Use this product with our lint-free wipe.

Do not use this product on printheads, capping station, wiper blade, and any other areas not specified above. Please note that this product can damage your parts if used improperly. It is also not intended for use on the skin.

Wash face, hands, and any exposed skin thoroughly after handling the product.

Do not insert this into the tube/ lines.

When using this product do not eat, drink or smoke. Please wear protective gloves/protective clothing/eye protection/face protection.

-----------------------------------------------------

DTF Station Lint Free Wipes 4" x 4" - 30 Sheets

Ultra soft, non-abrasive, lint-free wipes are designed for sensitive surfaces such as printhead and encoder strip.

They are 99.999% pure and guaranteed safe for cleaning printhead surface, encoder strip and capping station.

Great for printhead overnight soaking / locking.

 -----------------------------------------------------

DTF Station 7" Cleaning Swabs - 50 Each

Cleaning Swabs to use alongside DTF Station printers.

These Foam Cleaning Swabs are perfect for detailed cleaning on various parts of DTF Station's printers. Available in packs of 50 swabs each.

Features

  • Foam Head
  • Pairs well with all DTF Station printers

Benefits

  • Narrow form allows for detailed cleaning of small parts/areas

Specifications

  • Swab Material: Foam
  • Swab Length: 7 inches
  • Quantity: 50 swabs in each pack

Info