NPFX HI-Rise PUFF Special Effects Plastisol Inks

Why do our Colors POP, instead of looking dull? We load 125% of the standard high opaque pigment load to every color. Yes, its makes our inks a little more expensive to produce, but You will LOVE the BRIGHT Hi Rise Colors!

GENERAL DESCRIPTION

NPFX inks are formulated for ease of printing, during the heat curing process the inks expand, giving an elevated Puff Surface to the ink.

Puff inks have excellent durability and resistance to over blow during the curing process.

Opacity: Excellent
Viscosity : Medium
Bleed Resistance : None
Build Up : Medium
Definition: Minimal to Average

Recommended Substrates
Cotton or over an underbase on Poly blends & Poly

Flash Curing: 230 Degrees F.
Full cure: 320 Degrees F
Expansion Temperature: 290 to 320 Degrees F.

The thicker the ink deposit, the slower the cure time to
assure the entire ink film reaches cure temp. Fusion tests should be made prior to any production run. Failure to cure properly causes poor wash fastness, inferior adhesion and increased dye migration.

Squeegee: 60, 70, 60/90/60, 70/90/700

Wash-Up: ECO3000 Ink degrader or SCP17 Press Wipe.

Mesh: 24 to 86

Stencil: CBX7700 or CBX7500 is recommended but will work with Any Conventional direct emulsion or capillary films.

EOM: 15 to 20%
Off-Contact 1/16”