The compact Lo-E 1D is ideal for use in any shop where limited floor space or limited amperage is a concern. Measuring 41 in. (105 cm) wide by 48 in. (122 cm) long, this model can cure up to 23 garments/h printed with digital white ink at 3 minutes dwell time, or 64 garments/h with DTG pretreatment only or water-based inks at 60 seconds dwell time.
Engineered for energy-conscious printers, the 18 in. (46 cm) long heating chamber houses a 24 in. (61 cm) wide by 16 in. (40 cm) infrared heater that provides 2,850 watts (2.85 kW) of power while drawing only 12.5 amps at 230V. Height-adjustable, the heater carries an industry-leading 15-year warranty, and is configured with a boost zone and dual controls for temperature adjustment from 0 to 950°F (0-524°C).
The 30 in. (76 cm) wide conveyor belt runs true by means of a low friction belt aligner patented by the company, with belt speed controls allowing infinitely adjustable dwell times from one to five minutes.
A 280 CFM (7.9 m3/min.) exhaust system evacuates moisture and air contaminates from the heating chamber, and cools the enclosure's outer skin and control panel.
As with all Vastex floor-standing dryers, the modular design allows for expandability to easily add chambers and conveyor length as production needs increase.
HIGH PRODUCTION
64waterbase ink
23 pre-treatment
23 DTG White ink
BELT WIDTH
(Maximum garment width)
30" (76 cm)
HEATER WIDTH
24" (61 cm)
ENERGY EFFICIENT
Draws only 12.5 amps at 230V for highly efficient curing
DEPENDABLE
Industry-leading 15-year heater warranty
