EconoRed 2 54" x 7.5' Dryer- SALE

Overstock Sale 240V Single phase *No additional discounts apply

EconoRed-2 54" is a High production dryers are an excellent choice for medium to large-sized shops. EconoRed 2 54 with a 54" wide belt and Dual 7,200 watt heaters for a total of 14,400 capable of curing 600+ pieces per hour per chamber. EconoRed 2 dryers are also equipped with an Exhaust System that cools the outer cabinet while evacuating moisture and fumes.

A top-mounted ventilation system filters exhaust air, cools the enclosure's outer skin, and evacuates moisture and fumes from the heating chamber. It also makes ER-II dryers over 20 percent quieter and 5 in. (13 cm) narrower, and allows the control box to be positioned the right side (standard) or left side of the enclosure to suit shop layouts.

All heaters feature closely spaced coils that provide high-density, medium-wavelength infrared heat for maximum cure speed without cold spots or under-curing, and come with a 15-year warranty.

The Vastex Infrared Focusing System allows heater adjustment to any height from 2 to 7 in. (5.1 to 17.8 cm) above the belt, allowing the operator to compensate for bulky garments or hats, and can be customized to provide additional heater clearance.

All models include a digital belt speed display and a belt tracking system for increased belt life. The digital PID temperature controller is accurate to +/- 1°F (+/-0.5°C), allowing the operator to fine-tune or accurately repeat drying results at any future time.

• 54" wide belt by 7.5'length
• 600 Plastisol or 200 Waterbased or Discharge per hour
• 240V Single Phase - $1.44 hour to operate
• Digital Temp Control
• Digital Belt Speed Control
• Cures Plastisol, Waterbased & Discharge Inks
• Adjustable Heater Height
• 15 Year Heater Warranty
• Upgradeable, Add on additional Belt extension and heat chamber and cure up to 1,000 shirts per hour. 

ADVANCED
Top-mounted, Focused Exhaust Air System evacuates fumes and moisture quickly

QUIET
20% quieter than earlier models

HEAVY DUTY
"X-Series" Conveyor Belt Tracking System

PRECISE
Infrared Focusing System allows 2 - 7 in. (5 - 17.7 cm) belt-to-heater height adjustment to accommodate bulky garments or hats, and can be customized to provide additional heater clearance

BELT WIDTH
(Maximum garment width)
30" (76 cm) or 54" (137 cm)

HEATER WIDTH
24" (61 cm) or 48" (122 cm)

MAXIMUM IMAGE WIDTH
18 in. (46 cm) or 42 in. (107 cm)
(Heater width minus 6 in. [15 cm])

ACCURATE
Temperature controller accurate to +/-1°F (+/-0.5°C)
Digital PID with fuzzy logic — industry's most advanced

CONSISTENT
Heavy duty DC belt speed motor with digital voltage display

INNOVATIVE
Shorter, slimmer and quieter with high heat and production

EXPANDABLE
Add heat chambers at 36 in. (91 cm) long each, and 18 in. (46 cm) belt extensions, front or rear

Additional chambers can be added
Conveyor extensions
Exhaust hood - reduces fumes at end of dryer
Heavy duty belt motor (recommended for longer conveyor belts)
3 phase power
Locking casters for easy mobility