ADV 825 Soft Hand Base Plastisol Ink

Advantage Softhand Base, add various amounts of Softhand base to extend the ink to lower cost per print or soften the feel of the print. May also be used for specialty print applications. Add 5 to 10% to soften the print, based on the color of the ink and garment.

Caution: Adding Soft hand bases, lowers the opacity of the ink and bleed resistance, so use with care and always test print to check for acceptable print results and cure.

Opacity: High opaque
Viscosity : Medium
Bleed Resistance : None
Build Up : Low
Definition: High
Recommended Substrates: Varies with Ink
Flash-cure: 230 Degrees F
Full cure: 320 Degrees F
Wash-Up: ECO3000 Textile Ink degrader or eco ink degrader

Fusion tests should be made prior to any production run. Failure to cure properly causes poor wash fastness, inferior adhesion and increased dye migration.

Inks manufactured for Kolormatrix are certified by one of the largest plastisol ink manufacturers in the world to be Phthalate Compliant and does not knowingly add plasticizers containing the phthalates listed and outlined in California Bill 1108, CPSIA HR-4040 and Oeko-tex Standard 100. The plasticizers identified may include di-(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), benzyl butyl phthalate (BBP), diisononyl phthalate (DINP), diisodecyl phthalate (DIDP), di-n-octyl phthalate (DnOP), (DIBP) Di-iso-butyl, and (DMP) Dimethylphthalate, including esters of ortho-phthalic acid and are not direct ingredients in the manufacture of Claira High Opacity Non-Phthalate Inks.