Advantage Gold Glitter Plastisol Ink
Advantage Gliiter inks are the Largest Flake size and all colors are non-corroding and have excellent rub and wash resistance.
Glitters are semi transparent, meaning your shirt color can effect the finished look of your print.
Most colors works better Print Flash Print or with an under-base white on dark garments.
Tip #1: Print thru a coarse mesh and Heat Press with a silicone sheet, while wet or lightly flashed and the ink will have a glassy finish similar to Foil.
TIP #2: Metallic inks reflect heat, so increase dry time and or temperature is necessary for Full cure
Viscosity : Medium
Bleed Resistance : None
Build Up : Moderate
Definition: Bold to Moderate
Cotton, cotton blends, polyesters, and some nylon (generally open weave or mesh types) as well as other synthetics.
Curing: Gel or flash-cure: Approximately 230 Degrees F/110 Degrees C.
Full cure: 320 Degrees F/160 Degrees C.
Transfer Temperature: 350 Degrees F/177 Degrees C.
Fusion tests should be made prior to any production run. Failure to cure properly causes poor wash fastness, inferior adhesion and increased dye migration.
Opacity : Medium
Squeegee: Use medium 70 durometer
Wash-Up: ECO27705 Textile Ink degrader or SCP17 Press Wipe.
Mesh: Use 24-60 mesh count for brightest effect
Use 24-60 mesh count for cold peel transfers.
Stencil: CBX7700 or CBX7500 recommended but will work with Any Conventional direct emulsion or capillary films.
|Location||4345 Commerce dr sw atlanta ga 30336|
|History||Color sit amet, consectetur adipiscing elit. In gravida pellentesque ligula, vel eleifend turpis blandit vel. Nam quis lorem ut mi mattis ullamcorper ac quis dui. Vestibulum et scelerisque ante, eu sodales mi. Nunc tincidunt tempus varius. Integer ante dolor, suscipit non faucibus a, scelerisque vitae sapien.|
$9.95 Flat rate shipping nationwide
5 Star rated customer service
Mon-Fri: 8.30 AM - 5 PM (EST)
Create New Account