Product Description

SCP708 is a Super Powerful, Bio-Degradable, Highly concentrated caustic cleaner that is designed to remove even the most stubborn, locked in stains, even ones that have been previously reclaimed. Begins to work on contact and can be reclaimed in less than 5 minutes. Our Premium Universal Haze Remover,s Bio-degradeable formula, easily removes old images, squeegee marks, etc from your mesh. 

Simply apply to both sides of screen, scrub in, let Stand for 5 Minutes and Pressure wash off.

• Drain SAFE
• Safe on screen mesh
• Bio-degradable
• Reduce reclaim time and cost per screen
• Formulated with powerful degreaser built in
• Low odor formula

Recommended Inks

Plastisol, U.V. & Solvent

Application

Step 1: Before each use thoroughly stir to mix Haze remover solution

Step 2:Apply with brush SCP708 Haze Remover onto BOTH sides of the screen. and scrub vigorously.

Step 3: Allow to set for 5 minutes.

Step 4: Using High Pressure Water, rinse from side to side, starting at bottom to top. Dont be afraid to get pressure wand close  (1" to 3") to the stubborn stain areas

Step 5: Repeat, if needed to remove stubborn stains.

Step 6: Rinse Thoroughly from Top to Bottom, being certain to remove all chemical residue.

TIP: We do NOT recommend spraying haze removers, especially without a respirator or you risk inhaling strong caustic fumes.

PRODUCT PROPERTIES

Appearance: Dark brown liquid
Odor: Caustic scent
pH: 13.5 
Flash Point : 150°F
Specific Gravity : 1.05
Weight, per gallon: 8.8 lbs.
Stability: Mix before using
DOT Shipping: Corrosive