TransPrint Hot Split Transfer Plastisol Ink
TFX Trans Print is a Soft-feel, hot-split transfer ink that offers improvements in printability and ease of printing both manually and automatic.
Opacity: Very Good
Viscosity : Medium
Bleed Resistance : None
Build Up : Medium
Knitted fabrics, cotton, linens, cotton / polyester blends & rayon. NOT recommended for woven nylon or lycra.
Gel Curing: 195-230 F Lower temps will result in a transfer with little tensile strength, and higher temps will negatively affect the "split" of the final transfer.
Full cure: 320 Degrees F
Transfer temp 365-375 F (185-190 C)
Transfer time 5 to 7 seconds
Transfer pressure 40-45 PSI
Opacity : Very Good
Squeegee: Use medium 70 durometer
Wash-Up: ECO27705 Textile Ink degrader or SCP17 Press Wipe.
Mesh: Use 60 to 110 mesh counts for increased opacity
Use 110 to 230 mesh counts for more Detailed images
Stencil: CBX7700 or CBX7500 recommended but will work with Any Conventional direct emulsion or capillary films.