Lumina 9000 Series Opaque Colors: Thermal Advantage Heat Transfer Film
Lumina 9000 Series is a premium, easy weed PU polyurethane opaque colored heat transfer film designed for application to various textiles. This HTV product features excellent weeding capability for detailed designs, hot or cold peel for fast applications and opacity for multi layer jobs. For use on 100% polyester, 100% cotton, poly/cotton blends and uncoated nylon. Lumina 9000 series are CPSIA Compliant certified phthalate and lead free HTV, Safe for use on Infant, Children and Adult garments in the United States.
Lower Temp adhesive, Adheres at 302F
Very Thin & Flexible for soft designs.
Easy Weeding for less headaches.
Tested at over 100 washes for durability.
Directions –Keys to Success
#1 TEMP: 302F
#2 TIME: 10 Seconds
#3 Pressure: 3.5 bars or Medium
#4 Liner Removal : HOT Peel
Cover Sheet: Always use a Teflon Sheet
Cutting : Reverse Image
Blade : 45 degree
Layering: 1 to 2 seconds per layer & 10 second for last layer.
Substrates : Cotton, Polyesters, Poly Blends & Uncoated Nylon
Thickness: 89 microns approximately 3.5 mil thickness
Washing: Wait 12 hours after application & Wash Inside Out
Washing Temp: Warm or Hot and Dry Normal
Dry Clean: Not Safe, can damage or remove vinyl
Storage Temperature: 65°F - 95°F
Storage Notes: Avoid storing in direct sunlight
AVAILABLE SIZES 15” or 20” width by 1 foot, 1 Yard, 5 Y, 10 Y, 25 Y & 50 Y rolls.
SAFETY STANDARDS: CPSIA Compliant certified phthalate and lead free HTV, Safe for use on Infant, Children and Adult garments in the United States.
4 Keys for Professional Grade Results are Temp, Time, Pressure and Liner Removal. ALWAYS follow directions as these Keys change for every type of HTV, even vinyl from the same brand will vary by type, glitter, flock, etc.
Detailed Application Instructions
¨ Cut image in reverse
¨ Weed excess vinyl from design
¨ Preheat the shirt for 2 seconds
¨ ALWAYS use a Teflon sheet , Teflon cover or Kraft paper
¨ Apply design at 305°F
¨ Use medium pressure for 10 seconds
¨ Peel vinyl liner sheet while hot.
¨ If area of vinyl lifts, replace liner and re-press for 10 seconds.
¨ Iron Setting Dial between Cotton and Linen
¨ ALWAYS use a Teflon cover or Kraft paper with Lumina 9000
¨ Place on Hard Flat Surface, Ironing board is not recommended
¨ Press iron with Firm pressure, Do NOT Slide iron back and forth
¨ Press each section, overlapping pressing of design for 15 to 20 seconds
¨ If area of vinyl lifts after application, replace vinyl liner sheet and re-press for 15 to 20 seconds
¨ Peel liner sheet slowly while hot