Cotton White is Super opaque resulting in excellent coverage on dark garments. The low tack formula allows printing through finer mesh counts without the need for a viscosity modifier. Use as an underlay where additional opacity is needed or as a stand-alone white. Creamy, short body plastisol for easy printing. Low tack formula for fast shear action.
- High performance white for 100% Cotton.
- Creamy, short body plastisol for easy printing.
- Low tack formula for fast shear action.
- User friendly, no viscosity modifiers necessary.
- Great opacity with quick flash.
- Low hot tack does not need a cool down station.
- Will not cause ghost on 100% cotton.
Viscosity : Medium
Bleed Resistance : None
Build Up : Low
Substrates 100% cotton
Bleed resistance None
Mesh: Use 86 to 230mesh count for optimum opacity
Tension 15-20 acceptable, 25-35 recommended
Squeegee type 60-80 durometer. Dual (70/90) or triple (70/90/70)
Squeegee blade: Sharp
Squeegee angle:Avoid excess pressure
Squeegee speed: Medium to Fast
Gel temp 160-180 F
Cure temp:320 F entire film
Wash-Up: ECO27705 Textile Ink degrader or SCP17 Press Wipe
Stencil: CBX7700 or CBX7500 recommended but will work with Any Conventional direct emulsion or capillary films.
Inks manufactured for Kolormatrix are ISO 9001 certified by one of the largest plastisol ink manufacturers in the world to be Phthalate Compliant and does not knowingly add plasticizers containing the phthalates listed and outlined in California Bill 1108, CPSIA HR-4040 and Oeko-tex Standard 100. The plasticizers identified may include di-(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), benzyl butyl phthalate (BBP), diisononyl phthalate (DINP), diisodecyl phthalate (DIDP), di-n-octyl phthalate (DnOP), (DIBP) Di-iso-butyl, and (DMP) Dimethylphthalate, including esters of ortho-phthalic acid and are not direct ingredients in the manufacture of Claira High Opacity Non-Phthalate Inks.