* Digital Controls & Expandable - Add on additional heat chamber and it Upgrades to become Little Red X3D-2. 

* Powered Exhaust to evacuate fumes and moisture from dryer

* Production dryer with 30" wide conveyor belt.

* Adjustable Heater height / angle

* Digital Temperature control

* Digital Belt speed

* Tilting heater design which works great for curing hats or mugs.

The all-new multi-purpose LittleRed X3-D infrared dryer cures direct-to-garment (DTG) printed textiles as well as plastisol, water-based and discharge-printed garments at higher rates than possible with conventional dryer designs. It features a high-powered pre-heating zone that rockets ink temperatures past 300°F (149ºC) within the first several inches of conveyor travel, maximizing the distance and dwell time for optimum curing of any ink, allowing increased conveyor belt speeds and dryer output. With overall conveyor belt length of 88 in. long and 41 in. long heating chamber, the X3-D features a powerful 380 cfm targeted exhaust system as standard to rapidly remove moisture and air contaminates from the heating chamber, as well as cool the skin and controls. 

# #  Production speeds are estimated by the manufacturer and will vary depending on printing parameters, deposit, and type of ink, humidity, the weight of the garment, etc.

HIGH PRODUCTION
360 plastisol shirts per hour
185 waterbased / discharge shirts per hour
77 DTG white ink @ 2 minutes per hour

LOW COST OPERATION
X3D 30"  $0.87 per hour power 

ELECTRIC
X3D 30" 8,900 Watts heaters - 240V, single phase,  38 amps, 3 wire connector

SMART
30" wide Teflon coated fiberglass belt with tracking system

ADJUSTABLE
Speed, temperature, heater height and tilt

PRECISE
Powerful infrared heater with tight coil pattern and heat shields

VALUABLE
15 Year Heater warranty, high quality, exceptional service

COMPACT
X3D 30" - 41" width x 88" length

EXPANDABLE
Dryer grows with Your Business, simply Add additional Belt length and heat chamber in the future, dryer doubles in production and becomes X3D-2 Dual chamber

Options
Additional Belt length 18" or 36" length
Drop Down Wheels

This equipment ships LTL, some assembly is required