DTF Station Quick Glide (Hot Peel) DTF Film

Features:

1. High Ink Loading Layer: You can lay down more color / white to create rich colored decorated DTF prints.
2. Warm Peel: Peel off the film (5-7 seconds) without a long wait after the first press.
3. Hot Peel: Peel off the film (1-2 seconds) without a long wait after the first press.
4. Double Side Matte: The print side will always be on outside of roll and has a scratchable surface.

Compatible with:

• Any DTF printer on the market - **Recommended use with a roll printer.**

Instructions:

1. Print the image onto the matte side of the film in mirror mode. (CMYK>>White Ink)
2. Apply hot melt powder evenly and remove the excess powder. Use a Seismo DTF Powder Shaker to apply powder with ease!
3. Hover with a heat press to bake the hot melt powder (340°F, 5min). Or use a curing oven (300-315°F, 1min).
4. Transfer the image by heat press at 330°F for 15sec with medium pressure.
5. After the first press,
   Option 1: Wait for 4-6 seconds and remove the film gently
   Option 2: Rub the top surface with a cloth to remove some heat and peel off the film gently
6. Heat press again at 330°F 5-10sec with medium pressure to enhance softer hand feel.