FREE Pre-Press Tips & Application Guide
3 Different Ways to get beautiful Screens every time.
#1 Alternate 4 Chemical Application w/ Haze Remover
#2 Alternate 4 Chemical Application w/out Haze Remover
#3 NEW Express 3 Chemical Application w/out Haze Remover
#1 Standard 4 Chemical Application w/ Haze Remover
| Screen Making | Starting with New Screen | Starting with Screen that has been Printed |
| Step # 1 | SCP623 Degreaser - Spray Both side & Scrub until foaming | EC02770 Ink Degrader - Spray Both Sides & Scrub Briskly |
| Step # 2 | Rinse with Water, side to side, starting from top and working down. | Pressure Wash with Water |
| Step # 3 | Dry Screen in Dust Free Environment | SCP625 Emulsion Remover - Spray Both Sides & Scrub Briskly |
| Step # 4 | Coat with CBX Emulsion in Light Safe Environment | Pressure Wash with Water |
| Step # 5 | Dry Emulsion Print side (mesh side) down -overnight or in a drying cabinet | SCP623 Degreaser - Spray Both side & Scrub until foaming |
| Step # 6 | Apply Film Positive -centered in screen and mirror image | Rinse with Water, side to side, starting from top and working down. |
| Step # 7 | Expose screen for appropriate time - see emulsion page | Needed - SCP708 - Haze Remover, Brush on Both Sides, let set 5 minutes |
| Step # 8 | Rinse with water from the Print side of the Screen to clean stencil | Pressure Wash with Water- Rinse thoroughly |
| Step # 9 | Dry in a Dust Free Environment | Dry Screen in Dust Free Environment |
| Step # 10 | Tape Up edges of Screen to go On Press | Coat with CBX Emulsion in Light Safe Environment & move to Step 5 of New Frame Column |
#2 Alternate 4 Chemical Application w/out Haze Remover
| Making | Starting with New Screen | Starting with Screen that has been Printed |
| Step # 1 | SCP623 Degreaser - Spray Both side & Scrub until foaming | EC02770 Ink Degrader - Spray Both Sides & Scrub Briskly |
| Step # 2 | Rinse with Water, side to side, starting from top and working down. | Pressure Wash with Water |
| Step # 3 | Dry Screen in Dust Free Environment | SCP625 Emulsion Remover - Spray Both Sides & Scrub Briskly |
| Step # 4 | Coat with CBX Emulsion in Light Safe Environment | Pressure Wash with Water |
| Step # 5 | Dry Emulsion Print side down -overnight or in a drying cabinet | ECO3000 Premium Ink Degrader & Stain Remover - Spray Both Side & Scrub briskly. *** USE EVERYTIME you reclaim to avoid using a Haze remover*** |
| Step # 6 | Apply Film Positive -centered in screen and mirror image | Pressure Wash with Water, Rinse thoroughly. |
| Step # 7 | Expose screen for appropriate time - see emulsion page | SCP623 Degreaser - Spray Both side & Scrub until foaming |
| Step # 8 | Rinse with water from the Print side of the Screen to clean stencil | Rinse with Water, side to side, starting from top and working down. |
| Step # 9 | Dry in a Dust Free Environment | Dry Screen in Dust Free Environment |
| Step # 10 | Tape Up edges of Screen to go On Press | Coat with CBX Emulsion in Light Safe Environment & move to Step 5 of New Frame Column |
#3 Alternate 3 Chemical Application w/out Haze Remover
| Making | Starting with New Screen | Starting with Screen that has been Printed |
| Step # 1 | SCP623 Degreaser - Spray Both side & Scrub until foaming | EC05000 TKO Ink Degrader & Emulsion Remover- Spray Both Sides & Scrub Briskly |
| Step # 2 | Rinse with Water, side to side, starting from top and working down. | Pressure Wash with Water |
| Step # 3 | Dry Screen in Dust Free Environment | REPEAT Step #1 - If needed. EC05000 TKO Ink Degrader & Emulsion Remover- Spray Both Sides & Scrub Briskly |
| Step # 4 | Coat with CBX Emulsion in Light Safe Environment | Pressure Wash with Water |
| Step # 5 | Dry Emulsion Print side down -overnight or in a drying cabinet | ECO3000 Premium Ink Degrader & Stain Remover - Spray Both Side & Scrub briskly. *** USE EVERYTIME you reclaim to avoid using a Haze remover*** |
| Step # 6 | Apply Film Positive -centered in screen and mirror image | Pressure Wash with Water, Rinse thoroughly. |
| Step # 7 | Expose screen for appropriate time - see emulsion page | SCP623 Degreaser - Spray Both side & Scrub until foaming |
| Step # 8 | Rinse with water from the Print side of the Screen to clean stencil | Rinse with Water, side to side, starting from top and working down. |
| Step # 9 | Dry in a Dust Free Environment | Dry Screen in Dust Free Environment |
| Step # 10 | Tape Up edges of Screen to go On Press | Coat with CBX Emulsion in Light Safe Environment & move to Step 5 of New Frame Column |
There are no products to list in this category.