Super Soft Prints

No Flashing Needed

Prints Wet on Wet

3 Ways to fit Your Shop!

#1 Ready mixed colors
18 Standard Colors to choose from. Just add activator crystals.

#2 Miracle White
Use as Miracle White as underbase without Flashing and print Regular Plastisol Inks on top. Or use with other Discharge Colors

#3 Miracle Base
Mix 50/50 with Any brand Super Opaque Plastisol to make Your own Discharge Colors.

Color will become Bright AFTER Ink is Fully Cured!

KolorMAX is a Hybrid Plastisol / Waterbased Ink.

Easy to Use

Measuring
No Worries, with or without a scale, it?s a breeze. Kolormax is designed with You in mind,
so a little over or under is Not a problem. Use our EZ to follow guide to activate the perfect amount for Your Job!

Less Waste
24 Hour Pot Life - After 24 hours the discharge will no longer function

Recycle
Use the leftover ink for printing onto white shirts.

Clean Up
Easily with Water or Ink Degrader

Fabrics
100% Cotton - discharge dyed. Test before production, different Brands & Colors

Mixing
Be sure to stir at low to medium speed until crystals are completely dissolved.

Printing
Use HEAVY Pressure, you want to drive the ink deep into the shirt.
Print Wet on Wet, NO Flash Curing

Curing
320F for 90 to 120 seconds.
Do NOT run at a higher temperature, curing the ink for Less Time.
High Temp will lessen how well the shirt color is Discharged.

Mesh Count
110 to 180 mesh count is ideal for most applications

Stencil
Medium to long runs, use Water Resistant Emulsion. Short runs, most emulsions will work fine.